Spirit LIVE 4 Bedienungsanleitung PDF herunterladen (Seite 20)

7. GROUP OUTPUT

The Group outputs are driven by ground compensated

amplifiers to a standard

⁄

" 3 pole ‘A’ gauge jack socket.

M A STER SEC TIO N

8. D.C. POWER SOCKET

The cable from the power supply connects to the console via

this 5-pin socket.

Ensure that you always use the correct power supply for your

console. The 12, 16 and 24 channel frame sizes require the

DCP100 power supply and the 32 channel frame uses the

CPS150 power supply.

9. MONO OUTPUT

The ground compensated MONO output is a sum of the

postfade Mix Left and Right outputs, providing a separately

controlled feed which may for instance be used to drive a

centre loudspeaker cluster via a suitable power amplifier.

10. MIX L & R OUTPUTS

The MIX L & R outputs are standard male XLR-3 connectors,

driven by ground compensated amplifiers.

11. INSERTS

These are similar to the Input Channel Inserts and allow

external processing equipment to be ‘inserted’ into the output

signal path. The

⁄

" 3 pole ‘A’ gauge jack sockets are

by-passed except when a plug is inserted.

12. BA RG RA PH M ETERS

Six 12-segment, three colour bargraph meters provide visual

monitoring of the levels of the Mix Left and Right, and Group

outputs. All the meters are peak reading.

Normally the Left and Right meters show the level of the Mix

Left and Right outputs. If any PFL or AFL switch is activated

the left meter is turned off and the right meter displays the

level of the selected PFL or AFL signal.

The bargraphs may be calibrated by trimmers accessed via

holes in the panel below each meter. Adjustments may be

made using a small screwdriver, taking care not to damage

the trimmers.

M A STER

Pa g e 18

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Keine Kommentare

Spirit LIVE 4 Bedienungsanleitung Seite 20